Refilling

• For refilling, quickly turn over the water reservoir. Minimal water discharge will occur if done quickly.
• Empty contents from the tank, rinse, and refill as necessary.

Cleaning Instructions

• For every day, debris-free water, remove the filter ring and gently tap or rinse it clean.
• Hand wash the base with mild detergent as needed.
• Rinse thoroughly.
• Fill the water reservoir with water.
• Seat the plastic plug into the hole in the cap.
• Screw the cap snugly onto the filled water tank. Be careful not to cross-thread.
• Locate a dry, flat area to place the base of the waterer.
• Set water tank onto the base.
• The spike in the center of the base will dislodge the plug in the cap of the tank and automatically fill the water base.

FAQ

• What is the diameter of the opening for filling the tank?
  • The opening has a diameter of 1.75 inches.
• How long can a heated product be plugged in?
  • MET Safety Laboratories suggests unplugging the product if you leave your home on an extended vacation, as they do with any electrical appliance. Otherwise, it is designed for 24/7 operation and you can leave it plugged in all day. This item has been certified by MET labs to adhere to strict electrical safety standards. For more information, please visit www.metlabs.com.
• Is there an off/on switch?
  • There is not an off/on switch. It is always on when plugged in.