Usage

1. Connect the USB-C cable to your power bank
2. Press and hold the LED control for three seconds to turn on the system.
3. Press the LED control for 1 sec. to switch between the settings (High/Medium/Low).
4. When the vest is not heat activated, it disengages from the battery in order to save battery power. Battery must be turned back on to activate vest.

Automatic Functions

At one (1) long press, the "fast heating" function is activated. This will heat the vest to maximum temperature. The light flashes red in the meantime. During the quick warm-up (5 min) you can choose the heat level yourself by clicking through the options (red-white-blue). If you do not make an active choice, the heat will automatically switch down to a lower temperature (the middle position) after 5 minutes. The light is white.

• Red LED light: Maximum heat
• White LED light: Medium heat
• Blue LED light: Lowest heat

To turn off, press and hold the LED control until the light turns off.

Material Specification

• Fabric: 100% Polyester
• Side panels: 95% Polyester, 5% Elastane
• Lining: 100% Polyester

Washing Instructions

• Disconnect and remove battery.
• Replace the small rubber cover to protect the USB-C connector
• Close the battery pouch zipper
• We recommend inserting the vest into a Mesh Laundry bag
• No Dry Cleaning
• Wash in a cold gentle cycle
• Do not bleach
• Line dry only
• Do not iron

Safety Warning:

• The heating elements should not touch bare skin.
• Never use the product if the inside is wet.
• If discomfort occurs, turn off the product.

The product should be kept clean for maximum effect. The minerals that make up Welltex® have been infused into the material and cannot be washed out or worn off. Follow the washing instructions on the label for extended life and to preserve elasticity, texture and shape.